Hånd-holdt højt drejningsmoment elektrisk lukning maskine og crimping machine tools bruger spænding 100v-240v vakuum sealer
Hånd-holdt højt drejningsmoment elektrisk lukning maskine og crimping machine tools bruger spænding 100v-240v vakuum sealer
Sku: w41715
(0 Anmeldelser)
Nyhed

kr762.07 kr1 385.58

Beskrivelse:

Equipment Introduction

Handheld electric cap screwing machine is mainly used for tightening and loosening various threaded bottle caps.It is easy to carry around and can be easily used to tighten or loosen the bottle cap.Its adjustable clutch (adjusting force) can effectively avoid the damage of the bottle cap and reduce the wear of the inner plug.Once the bottle cap is tightened, the Chuck can stop rotating, indicates that you can perform the next bottle cap operation.It is suitable for the capping work of bottle caps with higher strength.It is suitable for the direct connection range of bottle caps of 10-50mm, and the production capacity of a single table can reach 30-90 bottles/minute.

Screw cap inner plug; Its screw cap inner plug adopts imported Pu adhesive, chemical name is-polyurethane, commonly known as beef tendon glue, which is made according to the specific bottle cap, durable, full of elasticity, very good for bottle cap.It protects the bottle cap and does not hurt the bottle cap.After many years of trial, it has a life span of about 50 times higher than that of ordinary silica gel pad capping head.

Technical parameters

Power supply: AC 100V-240V 50-60Hz

Power rate: 100W

Working mode: electric screw cap

Operation Form: Handheld

Screw cap diameter: 1-50mm

Production capacity: 30-90 bottles/minute (depending on proficiency)

Applicable bottle height: unlimited

Torque: 10-50 kgf.cm

Tips:

1. After ordering the goods, we strongly recommend that you use Alipay for payment, which is safe and secure.If Tao you use bank remittance, please contact the owner as soon as possible to deliver the goods in advance.This avoids the delivery delay caused by this.

2. Please open the goods in front of the courier on the spot when receiving the goods.If it is damaged or damaged, please reject it or notify the owner on the spot.

Tags: xs antal touch-stik.

  • Model: AS-650C
  • funktion: Forsegling
  • Materiale: Legeret Stål
  • Vægt: 2
  • Magt: 0.1
  • Type: Emballage Forsegling Maskine
  • Efter-salg service: 2 år
  • Skræddersyet behandling: Ja
  • Standard eller ikke-Standard: Standard
  • Oprindelse: KN(Oprindelse)
  • Certificering: CE
  • Emballage Type: flaske
  • Emballage: Plast
  • Standard: ANSI